X-PERT – NXN Model

Note: If you are located in Singapore, item will take ~2 weeks to reach your doorstep via tracked courier. PRICE APPLIES TO SINGAPORE ONLY. Please email us for a quote and estimated delivery time if your delivery location is elsewhere.

NX Model uses an Allen Key to change between spinning & static mode. Pole is bottom loading, so no ladder is required for installation/removal.

Standard set is adjustable for ceiling heights of 2235mm to 2745mm. (If your ceiling height is exactly 2745mm an additional extension may be needed depending on your set up location.)

For higher or lower ceiling heights, extensions are available for purchase. Not sure if you need an extension? Drop us a DM or check the X pole Height Chart.

THE X-PERT SET CONTAINS

• Micro Base Plate 
• Main Pole A (bottom pole) with attached height adjuster rod and adjuster cover –
• Main Pole B (top pole) – Only the Main Pole A and Main Pole B are needed for ceiling heights of 2235-2375mm
• 125mm extension 
• 250mm extension
• 1x 180mm X-Joint – Comes attached to the 125mm extension and used with the smallest extensions that are closest to the ceiling
• 2x 200mm X-Joints – Used to connect all larger pole pieces
• Top Adapter – Attaches to the upper most pole piece/extension
• Upper Support Dome – 40.64cm wide dome (comes with a silicone ring to protect your ceiling)
• Hex Key 
• 2x Carry Cases – One case is used for the pole pieces/extensions and the second is used for the micro base plate and upper support dome.
• Photo Display Manual